Desiccant dehumidifier for shipyards and marines (sandblasting and painting process)

Our new desiccant dehumidifier for shipyards and marine for use during sandblasting and paintings processes. For this moment available models MDC4000, MDC6000 and MDC8000.

DESIGN FEATURES

 

MDC6000 desiccant dehumidifier for shipyards and marine (1)

 

OUR CORE ADVANTAGES

Modern EC fans. Benefits of EC-fans:

  • built-in electronic control system
  • 30% less energy consumption in comparison with standard AC motors
  • low noise level

desiccant dehumidifier for shipyards and marine (19)

 

Desiccant silica gel rotor is sealed with a silicone tape with a Teflon (PTFE) layer in order to prevent air leaks. Sectors of the processes and regeneration air are separated by a PTFE tape as well in order to avoid mixing of the two air streams.

desiccant dehumidifier for shipyards and marine (17)

 

The mains power wiring of desiccant dehumidifier and the control system are made of high- quality components, manufactured in Europe. The manufacturers of the components are certified to the international standards ISO 9001, ISO 14001. Components comply with relevant and applicable EU standards and regulations.

desiccant dehumidifier for shipyards and marine (16)

 

Durable and tight rubber seal with a metal cord.

desiccant dehumidifier for shipyards and marine (20)

 

Pocket air filters class G4 EN779. The fixing mechanism of the filter in the filter section allows easy and safe exchange of the filter, but still ensuring high tightness and minimum leakage.

desiccant dehumidifier for shipyards and marine (18)

 

The panels of dehumidifier made from corrosion resistant, aluzink sheet  metal with 40mm rock wool insulation. Due to this fact dehumidifiers have a low noise level and, therefore, can be installed in the premises where people are present. Also, it can be installed outside with no risk of the dehumidifier freezing through.

desiccant dehumidifier for shipyards and marine (2)

desiccant dehumidifier for shipyards and marine (3)

 

 

 

 

 

 

 

 

 

 

TECHNICAL DATA

Process air

Rated airflow……………………………………….6000 m3/h

Available static pressure………………………..400 Pa

Reactivation air

Rated airflow……………………………………….1700 m3/h

Available static pressure………………………..320 Pa

 

Power supply

(3х400V, 50 Hz)…………………………………..56 kW

Current ……………………………………………….81 A

 

Miscellaneous data

Dehumidification capacity

(at 20 ˚С, 60%RH) ……………………………….39,4 kg/h

Weight ………………………………………………..1210 kg

Operating temperature ………………………….-30/+40˚С

Max noise level

without ductworks………………………………..70 dBA

Air filter (pocket) …………………………………G4

IEC protective class ……………………………..IP55

Insulation…………………………………………….40 mm

desiccant dehumidifier for shipyards and marine

desiccant dehumidifier for shipyards and marine