Humidity control at the maintenance of ice arenas and skating rinks

Production of Semiconductors

Humidity control at the production of semiconductors

The best way to solve problems at the production of semiconductors

  • How to stop the processes which deteriorate the quality of semiconductors at its production?

In order to achieve this goal, it is necessary to reach the optimum humidity during the production of semiconductors!

The problems

of uncontrolled humidity during production

  1. Improper adhesion, corrosion.

  2. Formation of undesirable junctions.

  3. Increase of heating of plates.

  4. Changes in the characteristics of the developer, which is absorbed into the layers of a semiconductor and causes swelling of the material.

  5. Failures of electronic and electrical systems.

  6. Quicker deterioration of bearing constructions of buildings.

The best solution to these problems is to remove excessive moisture by dessicant method during the production of semiconductors. This is a smoother technology of air drying, which ensures the optimum humidity-level.

This problem is solved by desiccant dehumidifiers of Desiccant Technologies Group

The advantages

of desiccant dehumidifiers of Desiccant Technologies Group

  1. High drying efficiency at a low energy-consumption level.

  2. Efficient operation at low temperatures.

  3. Easy installation.

  4. Small size and low weight.

  5. Possibility to fully automate the process of humidity control.

  6. Corrosion-resistant body (stainless steel, aluminum zinc).

  7. Compliance with all acting Directives and quality standards of the EU.

Desiccant Technologies Group, European manufacturer of high-tech industrial desiccant dehumidifiers well-accounted for in many industries, produces the most advanced equipment for the effective control of air humidity at the production of semiconductors.

Using the dessicant technology in production shops maintains the recommended relative humidity and the necessary airflow conditions, which allows to improve production processes.

Installation of DT Group equipment

  • Reduces the volume of waste at production;
  • Saves energy;
  • Increases productivity, reduces maintenance costs;
  • Creates the necessary microclimate at production and storage facilities.

How does the desiccant dehumidifier work?

The air which should be dehumidified (process air) goes through the desiccant rotor. Water molecules are adsorbed in a special silicagel rotor. Desiccant rotor is regenerated by the second air stream preheated to 90-140 °C. Moisture is removed from the premises in the form of warm moist air.